|
Model Methods |
The Model type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | add |
Adds a vertex to the model and returns its index.
|
| buildFEModel |
Build finite element model from given geometry with a minimum of _lc_number load cases.
|
| characteristicLength | calculates approximate maximum distance of two points in the model. |
| check_loadcase_index |
check whether there are results available for the model and a specific load-case and throw an exception in case there are none.
|
| check_results_availability |
check whether there are results available for the model and throw an exception in case there are none.
|
| clearLoads | Clear all loads. |
| Clone |
shallow clone the model.
|
| cloneElements |
clone the model's elements. Must be done before changing them in order to avoid side-effects.
|
| cloneMaterialList |
clone the model's materials. Must be done before changing them in order to avoid side-effects.
|
| cloneNodes |
clone the model's nodes. Must be done before changing them in order to avoid side-effects.
|
| clonePointLoads |
clone the model's point-loads. Must be done before changing them in order to avoid side-effects.
|
| cloneSupportPosition |
clone the model's supports. Must be done before changing them in order to avoid side-effects.
|
| cloneVertexPosition |
clone the model's vertex positions. Must be done before changing them in order to avoid side-effects.
|
| createFemBeam(String) |
Create a ModelBeam and corresponding BuilderBeam by cloning another beam of given identification string:
add CrossSection and element load information.
|
| createFemBeam(Int32, ListInt32) |
Creates a BuilderBeam and ModelBeam from beam index number:
add CrossSection, Material and element load information.
|
| crosec_ind | maps cross section guids to crosec indexes. |
| deepCloneFEModel |
deep clone the C++-model.
|
| Disassemble |
disassemble the model and ouput its parts.
|
| displacementsReady |
true if model displacements have been calculated.
|
| ElementInds(ListGuid) |
Retrieves element indexes connected to a given guid.
|
| ElementInds(ListString) |
Retrieves element indexes connected to a given element identifier.
|
| ElementInds(Guid) |
Retrieves element indexes connected to a given guid.
|
| Elements |
return all elements of the model.
|
| Elements(IEnumerableInt32) |
Retrieves elements connected to a given indexes.
|
| Elements(ListString) |
return set of element which match one of the given identifiers.
|
| Elements(Guid) |
Retrieves elements connected to a given guid.
|
| elementsByID |
returns list of elements that correspond to the given ids.
|
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object.) |
| fe2model |
update the model with data from the fe-model. Both models may be out of sync
after mappings were performed on the fe-model.
Has to be called before displaying the model or retrieving results.
|
| fe2model_update_NII |
update the NII forces based on the fe-model.
|
| femodelWasMapped |
gets called when a mapping was applied to the fe-model and the model needs an update
before display.
|
 | Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object.) |
| fitForCalculation |
Return true if the model can be calculated.
|
| fitForCalculationMsg |
Return message why model can not be calculated.
|
| forcesReady |
true if forces in the model have been calculated.
|
| GetHashCode | Serves as the default hash function. (Inherited from Object.) |
| GetObjectData |
Serializes the model-object.
(Overrides CommonObjectGetObjectData(SerializationInfo, StreamingContext).) |
| GetType | Gets the Type of the current instance. (Inherited from Object.) |
| HasUserData |
true if the object has user-data attached.
(Inherited from CommonObject.) |
| id_num |
Returns the element's identification number for anidentifier.
|
| initElementGuid2Ind |
initialize the mapping from element Guids to element indexes.
|
| initMaterialCroSecLists |
initialize the list of materials and cross sections.
|
| initShellMeshes |
initialize the model's shell meshes.
|
| mass |
mass of the model.
|
| massAndCOG |
calculate the mass in kg and center of gravity of the model.
|
| material_ind | maps material guids to material indexes. |
| maxAbsLoad |
Calculates maximum absolute value of a point-load or mesh-load in the model which is used for scaling the load symbols.
|
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object.) |
| minmaxEpsX |
calculate min/max axial strain in model.
|
| NodeInd |
Gets the index of the node at the given position within the search radius limitDist. If no point is within reach -1 is returned.
|
| NodeIndToElementInds |
Gets the list of element indices adjacent to a node of given index.
|
| setCroSecGroupIds |
sets the cross section family indexes according to the values in the given dictionary.
|
| setCroSecMaterial |
Sets the cross sections material. The cross-section references the material.
Add the material to the model if not already there and set the name.
|
| setLoadCaseFactors |
set the load case factors and the SuperPosition factors for
calculating states and display displacements.
|
| setNumberOfLoadcases |
this is used to limit the number of load-cases in case of eigenform- or natural frequency calculations.
|
| Support |
Get support at node of specified index.
|
| syncNumberOfLoadcases |
synchronize the number of load-cases with the feb-model.
|
| ToString |
string representation of the model.
(Overrides CommonObjectToString.) |
| Transform |
transform the model.
|
| updateDeformation |
Set position of displaced vertices in this model. Deform geometry of def_model by adding displacements of given load-case multiplied by factor.
Use projection currently in use for the model.
|
| updateMaterialCroSecLists |
update the list of materials and cross sections.
|
See Also